Mitsubishi Electric MELSEC iQ-R Series User Manual page 207

Item

Enable S7F17 Scenario
Process Program
Deletion Notification
Process Program
Deletion Completion
Notification
Trigger hold time
Register to Save
Process Program
Deletion Results
Description
Select this checkbox to enable the S7F17 (Process program deletion instruction).
Configure the trigger to report that an S7F17 (process program deletion command) was received from
the host to the programmable controller CPU.
Configure the trigger to report that the process program was deleted to the SECS/GEM communication
software.
A notification trigger results when the relays configured for Process Program Deletion Notification and
Process Program Deletion Completion Notification were held just for the configured time.
If the "Not Monitored" checkbox is selected, notification trigger processing is carried out without hold
monitoring.
Configure the register to report that the process program was deleted by a deletion command to the
SECS/GEM communication software.
8 GEM COMPLIANT FUNCTIONS
8.9 Process Program
8
205