Console Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Console setting

Series
MELSEC-Q series
MELSEC iQ-R series
Window
[Setting]  [Option Setting]  [Console] tab
Displayed items
Item
Console Setting 
*1
User
Password
Serial port information
Communication speed
Data length
Parity
Stop bit
Flow control
*1 For characters applicable to the user name and password in C Controller modules, refer to the following:
C Controller Module User's Manual (Hardware Design, Function Explanation)
SECS/GEM communication software
Non-GEM version


Description
Select this checkbox to acquire log data of the SECS/GEM communication software from the MELSEC-
Q series SECS/GEM communication software pre-installed model module through serial
communication.
If this checkbox is selected, the console function always runs within the SECS/GEM communication
software.
Configure the user name when logging into the console.
Do not use invalid characters in C Controller modules or '#' for the user name.
*1
Configure the password when logging into the console.
Do not use invalid characters in C Controller modules or '#' for the password.
Configure the communication setting information for the console connection.
GEM version


GEM advanced version


7 BASIC FUNCTIONS
111
7.7 Option Setting
7