Communication State Model Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Communication state model setting

Configure the details of the communication state model.
Default
Window
[GEMFunction]  [Communication State]  [Default] tab
Displayed items
Item
Communication State
Communication Establishment
Timeout
State notification
Window
[GEMFunction]  [Communication State]  [State Notification] tab
Displayed items
Item
Communication State Notification
Interlock Relay
8 GEM COMPLIANT FUNCTIONS
182
8.4 Communication State Model Management
Description
Select the default communication state of the SECS/GEM communication software upon power.
This setting is reflected in the equipment variable DefaultCommunicationsState.
Configure the timeout value for communication delay timer.
Values from 1 to 240 seconds can be specified.
This setting is reflected in the equipment variable EstablishCommunicationsTimeout.
Description
Set the register used by the SECS/GEM communication software to notify the current state of the communication state
model to the Programmable Controller CPU.
This setting is reflected in the state variable CommunicationsState.
For more details of values, refer to the following:
Page 216 Variables defined by default
To lock transition of the communication state and transition operations, use an interlock relay to switch this relay ON
from the programmable controller CPU.