Checking The Registration State Of The Secs/Gem Communication Software License - Mitsubishi Electric MELSEC iQ-R Series User Manual

9.3
Checking the Registration State of the SECS/GEM
communication Software License
Series
MELSEC-Q series
MELSEC iQ-R series
The SECS/GEM communication software license is pre-installed on the SECS/GEM communication software pre-installed
model module, but the license is erased when the SECS/GEM communication software pre-installed model module has been
initialized.
In such a case, the license must be registered again using the license file stored on the product CD-ROM.
If the license state notification function is used, an automatic stop of the SECS/GEM communication software due to a license
registration error can be detected in advance.
Usage method
To use notification of the license state, it is necessary to configure the relay and register to report. ( Page 113 Version
information)
Configuring the setting makes it possible to check the following states.
License state
Version Information
License Registration
License Matching
When the License Registration and License Matching relays are both ON, a genuine license has been registered.
Whether a genuine license has been registered can be determined by the [License Matching] relay.
SECS/GEM communication software
Non-GEM version


Notification content
The version of the SECS/GEM communication software is stored as an ASCII character string (null termination).
Five words are used.
The registration state of the license file is reported by relay.
0: No registration
1: Registration
The validity of the license file is reported by relay.
0: Non-genuine license
1: Genuine license

9.3 Checking the Registration State of the SECS/GEM communication Software License

GEM version


9 SECS/GEM COMMUNICATION SOFTWARE KNOWLEDGE
GEM advanced version


241
9