Mitsubishi Electric MELSEC iQ-R Series User Manual page 98

HOST/GATEWAY mode operations
Name
HOST mode setting
GATEWAY mode setting
Register storage formats
The following table shows examples of the communication disconnection occurrence times stored to registers.
• "Communication disconnection occurrence time" is configured to D201
• Communication disconnection occurrence time is "2009/12/15 9:46:15.195"
Register No. DATE-Q
D201 2009 (Year)
D202 12 (Month)
D203 15 (Day)
D204 9 (Hour)
D205 46 (Minute)
D206 15 (Second)
D207 2 (Day of week)
D208 Not used
D209 Not used
7 BASIC FUNCTIONS
96
7.7 Option Setting
Operation
• S9 messages are not sent automatically. However, there is notification when there is a setting of the S9 sending
notification relay.
• During S9 message receipt, messages are not discarded.
• The spool is normally disabled.
• No restrictions are applied to the transmission of messages, even in the case of communication disconnection or an
offline state.
• The spool is normally disabled.
• Time is synchronized by sending of S2F31 and S2F18.
DATE-A
9 (Year)
12 (Month)
15 (Day)
9 (Hour)
46 (Minute)
15 (Second)
2 (Day of week)
Not used
Not used
ASCII 12 ASCII 14
"09" (Year) "20" (Year)
"12" (Month) "09" (Year)
"15" (Day) "12" (Month)
"09" (Hour) "15" (Day)
"46" (Minute) "09" (Hour)
"15" (Second) "46" (Minute)
00(NULL) "15" (Second)
Not used 00(NULL)
Not used Not used
ASCII 16
"20" (Year)
"09" (Year)
"12" (Month)
"15" (Day)
"09" (Hour)
"46" (Minute)
"15" (Second)
"19"(1/100)
00(NULL)