Configuring Collected Events - Mitsubishi Electric MELSEC iQ-R Series User Manual

C controller/c intelligent function module secs/gem communication software pre-installed model
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

9.16

Configuring Collected Events

Series
MELSEC-Q series
MELSEC iQ-R series
Events are made up of report lists, and reports are made up of variable lists.
Both are configured by the setting tool.
Events and reports are identified by event IDs and report IDs.
CEID: Event ID
RPTID: Report ID
V: Variables
There are three variable (V) types: state variables (SV), dispersal variables (DV), and equipment constants (ECV), which are
configured by the setting tool.
Usage method
■Configuring variables
Variables disclosed by the equipment are configured by the setting tool.
Double-click a row inserted by [Insert] of the shortcut menu of the "Variable List" screen to display the "Variable Definition"
screen, and then configure the settings. (Page 210 Variable list, Page 212 Variable definition)
■Configuring reports
Double-click a row inserted by [Insert] of the shortcut menu of the "Report List" screen to display the "Report Definition"
screen, and then configure the settings. (Page 222 Report list, Page 223 Report definition)
To create a report, click [Create Report] button in the "Report Definition" screen, and then create the report at the "Create
Report" screen. ( Page 223 Create report)
For variables, select the variable to be added from the "Variables" pull-down list of the "Create Report" screen, and then click
the [Add] button.
■Configuring events
Double-click a row inserted by [Insert] of the shortcut menu of the "Event List" screen to display the "Event Definition" screen,
and then configure the settings. (Page 225 Event list, Page 226 Event definition)
To create an event, click [Create Event] button in the "Event Definition" screen, and then create the event at the "Create
Event" screen. ( Page 227 Create event)
For the report, select the report to be added from the [Reports] pull-down list of the "Create Event" screen, and then click the
[Add] button.
9 SECS/GEM COMMUNICATION SOFTWARE KNOWLEDGE
264
9.16 Configuring Collected Events
SECS/GEM communication software
Non-GEM version
GEM version
GEM advanced version

Advertisement

Table of Contents
loading

Table of Contents