Process State Model Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual
C controller/c intelligent function module secs/gem communication software pre-installed model
Hide thumbs
Also See for MELSEC iQ-R Series:
- Programming manual (2110 pages) ,
- User manual (760 pages) ,
- Reference manual (498 pages)
Table of Contents
Advertisement
Process state model setting
Configure the details of the processing state model.
Default
Window
[GEMFunction] [Processing state] [Default] tab
Displayed items
Item
No. Of Processing Sections
State notification
Window
[GEMFunction] [Processing state] [State Notification] tab
Displayed items
Item
Processing Section
8 GEM COMPLIANT FUNCTIONS
190
8.6 Processing State Model Management
Description
Configure the number of processing sections in the equipment.
Up to 99 sections can be set.
This setting is reflected in the equipment variable ProcessPartsCount.
Page 216 Variables defined by default
Description
Select the processing section to configure the register for state notification.
Processing State Notification
Configure the register to notify the programmable controller CPU of the current processing state.
This setting is reflected in the state variable ProcessState_part01.
For more details of values, refer to the following:
Page 216 Variables defined by default
Pre-Processing State
Configure the register to notify the programmable controller CPU of the processing state before
Notification
transition.
This setting is reflected in the state variable PreviousProcessState_part01.
For more details of values, refer to the following:
Page 216 Variables defined by default
Advertisement
Table of Contents
