Mitsubishi Electric MELSEC iQ-R Series User Manual page 219

Name Classi
ficatio
n
ProcessChangeStatus DVVAL
ProcessState_part01 SV
PreviousProcessState_p SV
art01
AlarmsEnabled SV
AlarmsSet SV
AlarmID DVVAL
MaxSpoolTransmit ECV
OverWriteSpool ECV
MaxSpoolCount ECV
EnableSpooling ECV
Description Format
Process state change state U1
Current process state U1
State prior to process state U1
change
Show the list of alarm IDs in LIST
the current alarm occurrence
state
Show the list of currently LIST
occurring alarm IDs

Occurred/ Cancelled Alarm
ID
Maximum No. of Spool U4
Transmission
Operation upon full spool BOOL
Maximum no. of spool items U4
Enable Spooling BOOL
E30 Variable value Notes
stan setting
dard

Register reference It is defined in processing state model
Can be set settings.
State number related to the processor
with the changed state is reported from
the programmable controller CPU
1: IDLE
2: SETUP
3: READY
4: EXECUTING
5: PAUSE
32: Setup command IDLE → SETUP
33: Setup completed SETUP → READY
34: Start instruction READY →
EXECUTING
35: Process completed EXECUTING →
IDLE
36: Stop instruction, switch to IDLE
37: Abort instruction, switch to IDLE
38: Pause instruction PROCESS →
PAUSE
39: Resume instruction PAUSE →
Previous PROCESS state

Register notification It is defined in processing state model
Can be set settings.
State number related to the
corresponding processor can be
configured for notification to a register
1: IDLE
2: SETUP
3: READY
4: EXECUTING
5: PAUSE
 Register notification It is defined in processing state model
Can be set settings.
State number related to the
corresponding processor can be
configured for notification to a register
1: IDLE
2: SETUP
3: READY
4: EXECUTING
5: PAUSE

Cannot be set It is managed within SECS/GEM
communication software.
(0 to 4096)

(Refer to Remarks) It is defined in alarm definition settings.
The occurring state details are defined in
the alarm state register.
 
It is managed within SECS/GEM
communication software.

Can be set It is defined in spool settings.
Default value: 1024 (0 to 4294967295, 0
means all is transmitted)

Can be set It is defined in spool settings.
0: do not spool further
1: overwrite from the oldest
Default value: 0

Can be set It is defined in spool settings.
Default value: 32767(1 to 4294967295)

Can be set It is defined in spool settings.
0: disable spool
1: enable spool
Default value: 0
8 GEM COMPLIANT FUNCTIONS
217
8.11 Variable Setting
8