Mitsubishi Electric MELSEC iQ-R Series User Manual page 114

How to use the console
Use HyperTerminal, which is included with the Windows operating system, to connect the MELSEC-Q series SECS/GEM
communication software pre-installed model module via serial communication.
HyperTerminal can be used with Windows 2000 and Windows XP.
■Start-up and login of HyperTerminal
1.
Select Windows Start  [Programs]  [Accessories]  [Communications]  [HyperTerminal].
2.
Enter the user name and password.
■Directory confirmation and manipulation
Use the following commands.
Command
dir
cd ***(directory name)
mkdir ***(directory name)
rmdir ***(directory name)
■Downloading of files
Download a file from the current directory.
1.
Enter the download command "down ***(filename)".
2.
From the HyperTerminal menu, select [Transfer]  [Receive File].
3.
Configure the file save destination, and configure the protocol to "Xmodem".
4.
Click [Receive].
■Uploading of files
Upload a file to the current directory.
1.
Enter the upload command "up ***(filename)".
2.
From the HyperTerminal menu, select [Transfer]  [Send File].
3.
Configure the file to be sent, and configure the protocol to "Xmodem".
4.
Click the [Send] button.
■Browsing Help
Use the following commands.
Command
help
7 BASIC FUNCTIONS
112
7.7 Option Setting
Description
Check a directory.
Move a directory.
Create a new directory.
Delete a directory.
Description
Check the commands that can be used.