Mitsubishi Electric MELSEC iQ-R Series User Manual page 40

Function
Status Control Ready
notification status
Control error
status
Online status
Line
disconnecting
status
Establishing
communication
status
Queue full of
messages waiting
to be sent
Spooling state
Spooled message
sending
Memory card error
Battery error
FTP server log
output error
6 FUNCTION LIST
38
Overview
Reports that the SECS/GEM
communication software that started
is in a controllable state.
Checks the operation state of the
SECS/GEM communication
software.
Reports that an online state was
established with the host
(S1F1→S1F2).
Reports that the line with the host
was disconnected.
Reports that communication was
established with the host.
Reports that the count of the sending
message queue from the SECS/
GEM communication software
became full.
Reports that messages subject to
spooling are being spooled.
Reports that the SECS/GEM
communication software is sending
messages subject to spooling.
Reports that some kind of error was
detected in the memory card.
Reports that the built-in battery has
been depleted.
Reports that the log output to the
FTP server failed.
Q12DCCPU-V- RD55UP06-V-
BZ11 BZ13 BZ15 BZ11 BZ13
   
   
   
RD55UP12-V-
BZ15 BZ11 BZ13
   
   
   
BZ15


