Mitsubishi Electric MELSEC iQ-R Series User Manual page 206

■Directory entry information of process program
Name
USE flag
DevNo
■Directory information of process program
Name
PPID
ChangeStatus
Host delete instruction
Selection state
DSNAME
UDStatus
RECLEN
RTYPE
ACK
Change notification
Configure the trigger information to report that a process program was changed or selected from the programmable controller
CPU to the SECS/GEM communication software.
To use the process program deletion function, select the [Enable S7F17 Scenario] checkbox, and then define the information
of the device to detect notification of deletion, deletion completion, etc. by the programmable controller CPU.
Window
Displayed items
Item
Process Program Change
Process Program Select
Directory State Synchronization Request
Trigger hold time
8 GEM COMPLIANT FUNCTIONS
204
8.9 Process Program
Required no. of devices
1
1
Required no. of devices
41
1
1
1
17
1
1
1
1
Description
Configure the trigger to report that the process program was changed at the equipment to the SECS/
GEM communication software.
Configure the trigger to report that the process program was selected at the equipment to the SECS/
GEM communication software.
Configure the trigger to request directory state synchronization to the SECS/GEM communication
software.
A trigger results when the relays configured for Process Program Change, Process Program Select,
and Directory State Synchronization Request were held just for the configured time.
If the "Not Monitored" checkbox is selected, trigger processing is carried out without hold monitoring.
Description
0 (disabled)/1 (enabled)
Device no. of the EPPD to be associated
Description
Process program ID
0 (no state change)/1 (create)/2 (edit)/ 3 (delete)
0 (not specified)/1 (specified)
0 (not selected)/1 (selected)
Data set name
0 (none)/1 (upload)/2 (download)
Discrete Maximum record length
0 (stream)/1 (discrete)
ACK value during upload/download