Default Definition Reports - Mitsubishi Electric MELSEC iQ-R Series User Manual

Operations of Create Report
■Add
Add a variable.
1.
Select the report to be edited from "Report".
When the [Create Report] button was clicked on the "Report Definition" screen, and the "Create Report" screen was opened,
the report is fixed to report selected at the "Report Definition" screen.
2.
Select the variable to be added to the report by using "Variable".
3.
Click the [Add] button.
■Move Up / Move Down
Move the selected variable.
Right-click  shortcut menu [Move Up]/[Move Down]
■Delete
Delete the selected variable.
Right-click  shortcut menu [Delete]

Default definition reports

The following table shows reports that are predefined in the SECS/GEM communication software.
Report name
CONTROL STATE
PROCESSING
PROCESSING STATE
ALARMS
EQP.CONSTANT CHANGE
LIMITS MONITORING
PP-CHANGE
PP-SELECT
SPOOL ACTIVE
SPOOL INACTIVE
SPOOL-TRANSMIT FAILURE
CLOCK
8 GEM COMPLIANT FUNCTIONS
224
8.13 Report Setting
Used variable
ControlState, Clock
Clock, PreviousProcessState_part01
Clock, ProcessState_part01,
PreviousProcessState_part01
Clock, AlarmID, AlarmSet
ChangeECID
Clock, LimitVariable, EventLimit, TransitionType
PPChangeName, PPChangeStatus
PPExecName
SpoolStartTime
SpoolCountTotal
Clock, SpoolCountActual, SpoolCountTotal
Clock
Remarks, related events
Control state transition event
Process start, completion and stop event
Equipment process state transition event
Basic format of report linked to alarm
Equipment constant change event
Event of transition within the Limit area
Process program change event
Process program selection event
Spooling start-up event
Spooling stop event
Spool transmission failure event
Material transfer, terminal service event, etc.