View The Log On Display Device (Got) - Mitsubishi Electric MELSEC iQ-R Series User Manual

View the log on display device (GOT)

Series
MELSEC-Q series
MELSEC iQ-R series
Using a register, display logs saved to the memory card on the display.
Since the data has been displayed via a register, configuring the script in GOT is not required.
If the SECS/GEM communication software receives an operation instruction by an operation register, the logs are deployed to
the display register.
To display logs on the display, select the checkbox of "View the log in Programmable Display" in the Log Output Settings.
Configure the devices used by the operation register and display register in the device assignment settings.
The following image shows when a log is displayed on a GOT.
Precautions
To display a log on a GOT, a screen must be created on the GOT in advance.
For the GOT drawing method, refer to the following:
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GT Designer3 Version1 Screen Design Manual (Functions)
7 BASIC FUNCTIONS
168
7.17 Log Output
SECS/GEM communication software
Non-GEM version


GEM version


GEM advanced version

