Table of Contents
Advertisement
Manual
F 240
3. Daily maintenance
3. 1. Inlet/outlet
system
3. 2. Alarm system
3. 3. Routine
handlings
Ver. 01
INSPECTION AND MAINTENANCE
4B
INSPECTION AND MAINTENANCE PROCEDURES
8C o Check if both water condensate drains in the air inlet casing are open ;
8D o Clean the turbocharger on the compressor side by means of water injection.
10--o Check, if the alarm system is engaged and check the working of the alarm
system ;
10--o Check the overspeed device by using the test key.
o Check the outside of the engine for leakages ;
4A o Keep the observation lists up to date and check for deviations ;
o Check the fluid levels ;
o Check the working of pressure gauges and thermometers visually ;
6C o Check the pressure difference of the lubricating oil filter, renew the filter elements
if the difference is too high ;
o Drain any impurities and water condensate from the day tank ;
o Drain water condensate from the air bottles ;
o Drain water condensate from the filter--water separator of the stopping device.
4 - - 5
Advertisement
Table of Contents
