Manual
F 240
Ver. 01
GOVERNOR
20A
20A
GOVERNOR DRIVE INSPECTION
GOVERNOR DRIVE INSPECTION
Before starting work, please consult:
-- chapter 2, "BACKGROUND INFORMATION" ;
-- chapter 3, "TECHNICAL DATA" ;
-- SUB-- SUPPLIERS MANUALS.
1. Remove the end cover (A) of the governor drive and the gasket and inspect cover
(B) and the gasket.
2. Visually check the gear wheels of the governor drive on such aspects as meshing
pattern, pitting and any other damage, and check the backlash.
Attention!
In case of non--conformities, have necessary parts replaced.
3. Fit the end cover (A) of the governor drive, using a new gasket.
4. Fit the inspection cover (B) using a new gasket.
A
--o--o--o--o--o--
B
20 - - 1