Table of Contents
Advertisement
Manual
F 240
Tool A
Ver. 01
CYLINDER LINER
15A
15A
NECESSARY TOOLS
NECESSARY TOOLS
1
Threaded rod. This runs along the length of the liner, and connects the top and
bottom flanges.
Tool number : 9612F145.
2
Eye nut. This screws on to the top of the threaded rod, and is then attached
to the hoist.
Tool number : 9612F147.
3
Flange for mounting and removing of the liner. These fit at the top and bottom
of the liner, and are used to lift it out of the cylinder block.
Tool number : 9612F215 . (2x)
4
Nut M30. Used to hold the flanges against the liner.
Tool number : 0185--020.
--o--o--o--o--o--
15 - - 1
Advertisement
Table of Contents
