Chrysler DODGE D150 1993 Service Manual page 1174

TRANSMISSION OVERHAUL—32RH

(9) Hold sun gear in place and install thrust plate

over sun gear at rear of driving shell (Fig. 77).

Fig. 77 Installing Driving Shell Rear Thrust

(10) Position wood block on bench and support sun

gear on block (Fig. 78). This makes it easier to align

and install sun gear lock ring. Keep wood block

handy as it will also be used for geartrain end play

Fig. 78 Supporting Sun Gear On Wood Block—32RH

(11) Align rear thrust plate on driving shell and

install sun gear lock ring. Be sure ring is fully

seated in sun gear ring groove (Fig. 79).

(12) Install assembled driving shell and sun gear

on output shaft (Fig. 80).

(13) Install rear thrust washer on front planetary

gear (Fig. 81). Use enough petroleum jelly to hold

washer on gear and be sure washer tabs are all prop

erly seated.

(14) Install front planetary gear on output shaft

and in driving shell (Fig. 82).

Fig. 79 Installing Sun Gear Lock Ring—32RH

DRIVING SHELL

Fig. 80 Installing Assembled Sun Gear And Driving

Shell On Output Shaft-32RH

Fig. 81 Installing Rear Thrust Washer On Front

Planetary Gear—32RH

Show Quick Links