Chrysler DODGE D150 1993 Service Manual page 1261

21 - 260 TRANSMISSION 0VERHAUL-42RH •
BRACE
J9321-150
SEPARATOR TRANSFER
PLATE PLATE
Fig. 108 Brace Plate Removal—42RH
TRANSFER
PLATE
UPPER
HOUSING
'SEPARATOR
PLATE
FILTER
SCREEN
BRACE J 9 3 2 M 5 1
Fig. 109 Upper Housing Separator Plate
Removal—42RH
TRANSFER
PLATE
REAR
CLUTCH
CHECK
BALL
Fig. 110 Rear Clutch Check Ball Location—42RH
VALVE BODY UPPER HOUSING
DISASSEMBLY
(1) Note location of check balls in valve body upper
housing (Fig. 111). Then remove one large and six
smaller diameter check balls with magnet (total of 7
check balls are used).
SMALL
DIAMETER
CHECK
BALLS (6)
LARGE DIAMETER
CHECK
BALL (1)
J9321-154
Fig. 111 Valve Body Check Ball Locations—42RH
(2) Remove E-clip t h a t secure shuttle valve second­
ary spring on valve stem (Fig. 112).
E-CLIP
SECONDARY
SHUTTLE
VALVE
J9121-179
Fig. 112 Shuttle Valve E-Clip And Secondary Spring
Location—42RH
(3) Remove governor plug and shuttle valve covers
(Fig. 113).
(4) Remove throttle plug, primary spring, shuttle
valve, secondary spring, and spring guides (Fig. 113).
(5) Remove boost valve retainer, spring and valve
if not previously removed.