Chrysler DODGE D150 1993 Service Manual page 1463

24 - 26 HEATING AND AIR CONDITIONING
•
(7) Remove the shaft seal seat, using seal seat tool
(Fig. 17).
J8924-32
Fig. 17 Shaft Seal Seat
(8) Insert the Seal Remover and Installer Tool
against the seal assembly. Press down against the
seal spring and twist the tool until it engages the
slots of the seal cage (Fig. 18). Lift out seal assembly.
J8924-33
Fig. 18 Seal Assembly
INSTALLATION
(1) Clean seal cavity thoroughly with a lint-free or
synthetic cloth and clean refrigerant oil. Then blow
out with dry pressurized vapor.
(2) Make sure all foreign substances are thor­
oughly removed.
(3) Insert Seal Sleeve Protector over compressor
shaft (Fig. 19).
J8924-34
Fig. 19 Insert Seal Sleeve Protector
(4) Do not touch the new seal lapping surfaces. Dip
the mating surfaces in clean refrigerant oil before
proceeding.
(5) Engage slots of Seal Remover and Installer to
new seal cage and insert seal assembly firmly into
place in the compressor seal cavity (Fig. 20). Twist
tool in opposite direction to disengage tool from seal
cage. Remove tool.
Fig. 20 Seal Assembly