Chrysler DODGE D150 1993 Service Manual page 1426

•
BODY COMPONENTS 23 - 43
HINGE
A N D LATCH
A R M REST
SEAT BACK
NUT SUPPORT RY670
Fig. 23 Folding Seatback Armrests, Supports & Hinges
COWL SIDE TRIM PANEL
REMOVAL
(1) Remove the screws from the cowl side trim
panel (or air vent) and the cowl panel (Fig. 24).
(2) Remove the trim panel (or air vent) from the
cowl panel.
INSTALLATION
(1) Position the cowl side trim panel at the cowl
panel.
(2) Install the screws in the cowl panel. Tighten
the screws to 4 N»m (35 in. lbs.) torque. A v o i d over­
t i g h t e n i n g t h e s c r e w s .
AIR VENT
( W / O TRIM PANEL)
AIR
VENT
A N D
C O W L
SIDE
TRIM PANEL
SCREW
C O W L
SIDE
TRIM
PANEL
C O W L
SIDE
PANEL
C O W L
SIDE
RIGHT SIDE PANEL
SCREW SCREW J 9 1 2 3 - 3 5 4
Fig. 24 Cowl Side Trim Panels & Air Vent
WINDSHIELD HEADER, A-PILLAR AND FRONT
DOOR HEADER TRIM PANELS
REMOVAL
R e m o v e the nearest screw in a n adjacent over­
lapping trim panel to avoid possible d a m a g e to
b o t h trim panels (Fig. 25).
R O O F
I N N E R PANEL
REAR
TRIM
PANEL
WEATHERSTRIP
SEAL
A-PILLAR
A-PILLAR
TRIM <
PANEL
D O O R
HEADER
TRIM
PANEL
D O O R HEADER
A N D REAR
TRIM PANEL
J U N C T I O N
R O O F
I N N E R
PANEL
W I N D S H I E L D
G L A S S
D O O R
HEADER
TRIM
PANEL
D O O R
HEADER
TRIM
PANEL
W I N D S H I E L D
HEADER
TRIM
PANEL
W I N D S H I E L D
G L A S S
D O O R HEADER
A N D A-PILLAR
TRIM PANEL
J U N C T I O N
D O O R HEADER
A N D W I N D S H I E L D
HEADER TRIM
PANEL J U N C T I O N
J 9 1 2 3 - 3 8 0
Fig. 25 Overlapping Trim Panels
(1) Remove the trim panel screws from the body
inner panels (Fig. 26).
(2) Remove the trim panels from the body inner
panels (Fig. 26).
INSTALLATION
(1) Position the trim panels at the body inner pan­
els.
(2) Install the trim panel screws in the body inner
panels. Tighten the screws to 1 N»m (12 in. lbs.)
torque.
UPPER REAR
TRIM PANEL
R O O F
I N N E R
PANEL
A-PILLAR W I N D S H I E L D
HEADER
TRIM
PANEL
F W D
S C R E W
D O O R
HEADER
TRIM PANEL
A-PILLAR
TRIM PANEL
W I N D S H I E L D
GLASS
S C R E W
J 9 1 2 3 - 3 7 9
Fig. 26 Door Header, A-PUIar & Windshield Header
Trim Panels