Chrysler DODGE D150 1993 Service Manual page 1411

23 - 28 BODY COMPONENTS
•
(2) Start at the upper, rear corner of the door open­
ing. Move forward and downward around the edge of
the door opening. Force the seal inward against the
panel. Seat the flange in the seal slot.
Seal p o s i t i o n i n g a t t h e c o r n e r s is critical. T h e
seal m u s t b e s e a t e d a t e a c h c o r n e r . A v o i d p u c k ­
e r i n g a n d s t r e t c h i n g t h e seal a t t h e c o r n e r s .
(3) When correctly installed, the seal ends will
meet at the door lower centerline.
(4) Inspect the fit of the door in the door opening.
If not correct, adjust the door fit so the seal is not
damaged when the door is closed. Refer to the door
adjustment procedure.
BUTYL DOOR
Fig. 14 Cab/Body-To-Door Weatherstrip Seat