Chrysler DODGE D150 1993 Service Manual page 1396

• BODY COMPONENTS 23 - 13
A M .
TAPE
STRIPE
WHEELHOUSE
LIP
CARGO BOX
L O W E R
R E A R , S I D E P A N E L
BUMPER
— • S E C O N D A R Y
COLOR
D O O R
P A N E L
FRONT /
FENDER
S C R E W
J9123-555
FUEL
FILLER
D O O R
SIDE OUTER
PANEL
J9123-342
Fig. 33 Cab & Cargo Box Stripes With Two-Tom
Paint
TAPE STRIPE
FLANGE J9123-593
Fig. 35 Tape Stripe installation On Door Flange
(3) Close the fuel filler door.
Fig. 36 Fuel Filler Door
NOZZLE/TUBES
REMOVAL
(1) Remove the fuel filler door (Fig. 36).
(2) Remove the cap from the nozzle (Fig. 37).
(3) Loosen the clamps and separate the hose from
the tube.
(4) Remove the screws t h a t attach the housing and
nozzle to the cargo box panel.
T h e f u e l c a p t e t h e r i s a l s o a t t a c h e d t o t h e
c a r g o b o x p a n e l w i t h o n e o f t h e s c r e w s ,
(5) Remove the housing and nozzle/tube from the
cargo box panel.
INSTALLATION
(1) Position the fuel filler housing and nozzle/tube,
and the fuel cap tether at t h e opening in the cargo
box panel.
(2) Install the housing, nozzle and tether screws in
the panel. Tighten the screws to 2 N»m (20 in. lbs.)
torque.
(3) Attach the hose to the tube with the clamp.
Tighten the fuel hose clamp screw to 2 N*m (20 in.
lbs.) torque. Tighten the vent hose clamp screw to 1
N
# m (12 in. lbs.) torque.
(4) Install the cap on the nozzle (Fig. 37),
(5) Install the fuel filler door.
OUTSIDE MIRRORS
STANDARD (NON-REMOTE) MANUAL MIRROR
REMOVAL
(1) Remove the screws from the mirror base.
(2) Remove the mirror and base from the door out­
side panel.
(3) If necessary, separate the mirror from the base.