Chrysler DODGE D150 1993 Service Manual page 1302

•
TRANSMISSION 0WERHAUL-4SRH 21 - 301
Fig. 85 Installing Thrust Washer On Front Planetary
Gear-46RH
Fig. 86 Assembling Front Planetary And Annulus
Gears—46RH
(16) Check planetary geartrain end play with
feeler gauge (Fig. 89). Insert gauge between rear an­
nulus gear and shoulder on output shaft as shown.
End play should be 0.15 to 1.22 mm (0.006 to 0.048
in.).
(17) If end play is incorrect, install thinner/thicker
planetary snap ring as needed.
Fig. 87 Installing Front Planetary And Annulus Gear
Assembly—46RH
Fig. 88 Installing Planetary Snap Ring—46RH