Chrysler DODGE D150 1993 Service Manual page 1422

• BODY COMPONENTS 23 - 39
Fig. 12 Insulation Mat—Diesel Engine
(2) Position the seat in the cab.
(3) For convenience, raise and support the vehicle.
Install the seat platform nuts on the studs. Tighten
the nuts to 26 Nnn (230 in. lbs.) torque. Remove the
support. Lower the vehicle.
(4) Position the shoulder belt buckles and lap belt/
buckle between the seatback and seat cushion.
Fig. 13 Bench Seat
BUCKET SEATS-RAMCHARGER AND CLUB
CAB
REMOVAL—LEFT SEAT
(1) Remove the bolts t h a t attach the seat platform
to the reinforcement panel and the floor panel.
(2) Remove the left bucket seat from the vehicle.
(3) The bucket seat can be removed without the
platform. Remove the seat platform stud nuts, spac­
ers and retainers.
platform stud spacers, retainers, and n u t s . Tighten
the nuts to 26 Nnn (230 in. lbs.) torque.
(2) Position the seat in the vehicle.
(3) Install the platform bolts. Tighten the nuts to
26 Nnn (230 in. lbs.) torque.
8923-56
Fig. 14 Left-Side Bucket Seat
REMOVAL—RIGHT SEAT
The right side bucket seat is equipped with a tilt-
able platform. This is to provide entry to the rear
seating area (Fig. 15). When tilted, a gas operated
rod supports the seat. The tilt-latch release levers
are located on the side and on the rear of the seat.
(1) Remove the bolts t h a t attach the seat platform
tilt hinge to the reinforcement panel and the floor
panel.
(2) Disconnect the gas operated support rod from
the seat platform (Fig. 15).
(3) Release the latch. Remove the seat from the ve­
hicle.
(4) The bucket seat can be removed without the
platform. Remove the seat platform stud nuts, spac­
ers and retainers.
INSTALLATION-RIGHT SEAT
(1) If removed without the platform, position the
bucket seat on the seat platform. Install the seat
platform stud spacers, retainers, and nuts. Tighten
the nuts to 26 Nnn (230 in. lbs.) torque.
(2) Position the seat in the vehicle.
INSTALLATION—LEFT SEAT
(1) If removed without the platform, position the
bucket seat on the seat platform. Install the seat