KEB COMBIVERT F5 BASIC Applications Manual page 3

General
1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Annex
© KEB Antriebstechnik, 2002
All Rights reserved
This chapter shall allow a fast access to the wanted information. It consists of contents,
index and search criterion.
Here the inverter and its features as well as the operating conditions and application
purpose are described.
Description of hardware, technical data of the inverter as well as connection of power
and control terminals.
The basic operation of the KEB COMBIVERT like password input, parameter and set
selection.
A list of all parameters classified according to parameter groups. The parameter
description comprises addresses, value ranges and references with regard to the
functions for which they are used.
To make the programming easier all inverter functions and the parameters belonging
to it are comprised in this chapter.
Gives support with regard to the initial start-up and shows possibilities and techniques
for the optimization of the drive.
Describes special operating modes, like e.g. DC-coupling.
Avoidance of errors, evaluation of error messages and elimination of the causes.
Survey of the possible interconnection in existing networks; address and value table
for the implementation in own protocols.
Survey of the possible interconnection of the KEB COMBIVERT in existing networks.
Everything that didn't fit anywhere else or what we didn't think of earlier.
Name:Basis
KEB COMBIVERT F5-G / B
Introduction
Date Chapter Section
1 1
28.02.02
1
Page
3
3