KEB COMBIVERT F5 BASIC Applications Manual page 64

Operation
Relay output 2 /
Switching level
Chapter Section Page
4 3
18
Factory setting CP.31:
Factory setting CP.32:
Note:
This parameter determines the switching point for the relay output 2 (CP.32). After the
switching of the relay, the value can move within a window (hysteresis), without the
relay dropping off. Since the operator can display only 5 characters, the last digits are
not represented in the case of higher values.
Adjustment range:
Resolution:
Factory setting:
Hysteresis:
Frequency:
Voltage:
Analog values:
Current:
Temperature
Date Name: Basis
KEB COMBIVERT F5-G / B
04.12.01
CP - Parameter
4
27
Enter-Parameter
-30000,00...30000,00
0,01
4,00
0,5 Hz
1 V
0,5 %
0,5 A
1 °C
© KEB Antriebstechnik, 2001
All Rights reserved