Configure System Settings; Enable Or Disable Bluetooth Service - Digi IX14 User Manual

Initial configuration

Configure system settings

To configure system settings:
1. From the menu, click Configuration.
2. Open System.
3. Provide the system information settings:
Name: (Optional) Enter a name for the system.
Contact: (Optional) Enter a contact for the system.
Location: (Optional) Enter a location for the system.
Banner: (Optional) Enter banner text to appear when a user logs into the system.
4. Configure Scheduled tasks:
Reboot time: (Optional) If you want to reboot the system daily, enter the time for the daily
reboot.
Start time/Duration window: Enter a start time and duration window for system
maintenance.
Frequency: Enter the frequency for the maintenance window.
5. If you want to add Custom scripts, click Add and configure the script.
6. Configure Time:
Timezone: Select the timezone for the Digi IX14.
NTP servers: If you want to add an NTP server, click ADD and specify the URL for the server.
7. Configure Log options:
Heartbeat interval: Enter the minimum time between sending heartbeat status events.
Event categories: Open the Event categories and enable/diable the event categories you want
to log.
8. Configure syslog servers:
Open Server and click Add to confgure an additional syslog server.
9. Click Save.

Enable or disable Bluetooth service

By default, Bluetooth service is enabled. To disable or enable Bluetooth service:
1. From the menu, click Configuration.
2. Open Services > Bluetooth.
3. Enable or disable the Bluetooth service as needed.
4. Click Save.
Note You will not see the Digi IX14 Bluetooth service listed on your smart phone or tablet.
Digi IX14 User Guide

Configure system settings

36