Trizaic Uplc Source - Waters TRIZAIC UPLC System Manual

• nanoACQUITY sample manager, with heating and trapping module
(required)
• nanoACQUITY binary solvent manager
• SYNAPT-series or Xevo-series mass spectrometer
Waters ships the TRIZAIC UPLC System with the following components:
• Analytical nanoTile
• Start-up kit:
– Cables
– Capillary tubing
– Waste tubing
– Calibration nanoTile
• For a Xevo TQ mass spectrometer, a flow splitter kit
• For a SYNAPT mass spectrometer, source adaptor housing
• Installation DVD with nanoACQUITY UPLC March 2011 driver pack
• Documentation CD:
– TRIZAIC UPLC System Guide
– TRIZAIC UPLC nanoTile Care and Use Guide

TRIZAIC UPLC source

The TRIZAIC UPLC source precisely positions the nanoTile and integral
emitter in the mass spectrometer. All fluid and electronic connections (heater
and electrospray high voltage) are made inside the source. The source can be
installed on Waters mass spectrometers that are compatible with the
nanoACQUITY UPLC System.
System components 1-3