Connecting To The Electricity Source - Waters ACQUITY UPLC M-Class System Manual

C External Connections

Connecting to the electricity source

Each system module requires a separate, grounded power source. The ground
connection in all power outlets must be common and physically close to the
system.
Warning:
• Use power cord SVT-type in the United States and HAR-type or
better in Europe. For other countries' requirements, contact your
local Waters distributor.
• Power-off and unplug each system module before performing any
maintenance operation on the module.
• Connect each system module to a common ground.
To connect to the electricity source:
Recommendation:
(UPS) for optimal, long-term, input voltage stability.
1. Connect the female end of the power cord to the receptacle on the rear
panel of each module.
2. Connect the male end of the power cord to a suitable wall outlet.
Alternative:
female end of the micro cart's electrical cables (included in the startup
kit) to the receptacle on the rear panel of each system module. Connect
the hooded, male end of the micro cart's electrical cables to the power
strips on its back. Finally, connect each power strip's cable to a wall
outlet operating on its own circuit.
94 March 10, 2014, 715003588 Rev. A
Avoid electrical shock:
Use a line conditioner and uninterruptible power supply
If your system includes the optional micro cart, connect the