Configuring The Nanolockspray Source - Waters Xevo G2 QTof Operator's, Overview And Maintenance Manual

4
Configuring the NanoLockSpray
Source
The Waters NanoLockSpray dual, electrospray, ion source enables the
optimized co-introduction of sample and lock mass compound directly
into the ion source. This feature provides authenticated, exact-mass
measurement in MS mode at low flow rates.
Contents:
Topic
Overview of the NanoLockSpray source

Configuring the NanoLockSpray source

Source type selection
Advancing and retracting the sprayer platform
Adjusting the sprayer tip position
Setting up the camera
Optional glass capillary sprayer
Page
4-2
4-4
4-5
4-6
4-7
4-8
4-9
4-1