Handling Slot Brackets; Installing Slot Brackets - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
Riser module
Riser module 1
Riser module 2
Riser module 3
Internal RAID
riser module
As an option, a full height riser module can be installed. In this case the
slot 2 is not available and slot 3 can be equipped with a full height
expansion card.
As an option, a rear HDD/SSD cage can be installed. In this case riser
module 2 and riser module 3 are not available.
As an option, an Internal RAID riser module can be installed behind
HDD backplane.
As an option, an LC kit can be installed. In this case riser module 3 is
occupied by the tubes outlets.
9.3

Handling slot brackets

9.3.1

Installing slot brackets

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Use the low profile bracket perforated for relevant controllers. No
bracket needed for installing the internal RAID controller in the internal
RAID riser module.
198
Slot Type
offered
Slot 1 PCIe Gen4 x16
Slot 2 PCIe Gen4 x16
Slot 3 PCIe Gen4 x16
(CPU2)
Riser PCIe Gen4 x8
slot
Upgrade and Maintenance Manual
Description
Low-profile slot
Low-profile slot
Low-profile slot (Liquid
Cooling, option)
Low-profile slot
Hardware: 5 minutes
RX2530 M6