Mitsubishi Eclipse 1990 Service Manual page 1355

AUTOMATIC TRANSAXLE
OVERHAUL
Detent plate
Parking roller support
evision
-Transaxle
a new O-ring on the, differential
coat the O-ring with
install in the transaxle case and tighten the mounting
bolts to the specified torque.
Differential rear bearing retainer' mounting
35
Nm (26
the front bearing cap and tighten the
specified torque.
Differential front bearing cap mounting
70
Nm (51
the differential cover and a' new gasket,
Differential
the detent
Detent plate mounting bolt: 11
a new O-ring on the manual control shaft
coat the O-ring automatic transmission fluid and then
insert into the transaxle case.
the groove in the manual control shaft and the set
screw hole; then install the set screw.
Manual control 'shaft,
the parking roller support.
24
Nm (18
retainer,
then
,
,
the
. .
Nm
(8
bolts: