Mitsubishi Eclipse 1990 Service Manual page 1855

Glass side
molding
Body side
Section B-B
Section C-C
mm (in.)
BODY Windshield and Window
(1)
glass and the body in the places shown in the illustration.
Specified primer:
Caution
1. Apply the primer evenly around the entire circum-
2.
(2) After applying the primer, let it dry for 3 to 30 minutes.
imer
(3) Within 30 minutes after applying the primer, use a sealant
gun to apply the adhesive evenly over the adhesion sur-
face of the vehicle body. (Refer to
Specified adhesive:
equivalent
NOTE
Cut
to facilitate adhesive application.
TSB Revision
GLASS INSTALLATION
a sponge in the primer, and apply evenly to the
ATD Part No. 8608 Super Fast Urethane
or equivalent
ference, because it strengthens the adhesive.
Otherwise, a too thick application will cause lower-
ing of the adhesive strength.
not touch the coated surface.
Part No. 8609 Super Fast Urethane or
of the
the nozzle tip sealant
shape
gun into a