Mitsubishi Eclipse 1990 Service Manual page 949

MANUAL TRANSAXLE OVERHAUL
(1) Apply the specified sealant to the bolt threads.
Specified sealant:
(2) Tighten to the specified torque while following the order
given in the illustration.
160030
I
ADJUSTMENT OF PINION BACKLASH
Measure the backlash between the side gears and pinions.
Adjust for same backlash of both side gears.
Standard value:
If backlash is out of specification, disassemble again and
using correct spacer, reassemble and adjust.
TSB Revision
Differential
JNSTALLATION
Stud Locking
mm
,
or equivalent
in.)