Mitsubishi Eclipse 1990 Service Manual page 1023

AUTOMATIC TRANSAXLE
Procedure Conditions
Selector lever Engine
position:
Overdrive
ON
Selector lever
A
position:
Overdrive
ON
(TURBO) AND
Operation Judgement value
Data list No. 27
(1) Driving at
constant
speed of 50
km/h (31 mph)
or
Data list No. 31
Data list No. 32
Monitor scan tool For
(3) should match
data list Nos. 27
and 32. the specified
(1) Accelerate to
speed (vehicle
gear at
speed), and
TPS output of
1.5 (opening
there should be
no abnormal
angle 30%).
(2) Slowly shocks.
erate to a
For
standstill.
downshifting
(3) Accelerate to
should be made
gear at
immediately after
TPS output of
operation.
2.5 (opening
angle 50%).
(4) At 50 km/h (31
mph) in
gear, turn
overdrive OFF.
(5) At 50 km/h (31
mph) in
gear, move
selector lever
to 2 range.
range, move
selector lever
to range.
TSB Revision
ENGINE
ENGINE>
Inspection item
Shift control
solenoid valve ,
A
Shift control
Pulse generator
Pulse generator
Malfunction
(2) and
when shifting
Displaced
shaft
shifting points
not shift
(5) and
Inspection procedure
page if there is an
abnormality
Code Nos.
Shift control solenoid
system
Code Nos.
Shift control solenoid
valve system
Code Nos.
Pulse generator A
system
Code Nos.
Pulse generator
system
Shocks and flare shifts
All points
Some points
No fail-safe codes
Code Nos.
Pulse generator A
s y s t e m
C o d e
Pulse generator
system
Code Nos.
Shift control solenoid
valve A system
Code Nos.
Shift control solenoid
valve system