Troubleshooting - Mitsubishi Eclipse 1990 Service Manual

AND
Valve
CONTROL
PURGE CONTROL VALVE
1. Remove the purge control valve.
2. Connect a hand vacuum pump to the vacuum nipple
of the purge control valve.
3. Apply a vacuum of 53
ness.
4. Blow in air lightly from the evaporative emission canister
side nipple and check conditions as
Hand vacuum pump vacu-
um
0 (0
is applied)
27 (8.0
5. Connect a hand
nipple of the purge control valve.
6. Apply a vacuum of 53
ness.
VOLUME AIR FLOW SENSOR, ENGINE COOLANT
TEMPERATURE SENSOR AND INTAKE AIR
TEMPERATURE SENSOR
Refer to GROUP
AIR CONDITIONING SWITCH
Refer to GROUP 55
Revision
(Turbo) and Engine>
Engine
(16 and check
follows.
Normal condition
Air does not blow through
(No vacuum
or more Air blow through
vacuum pump to the positive pressure
(16 and check

Troubleshooting.

Air Conditioning Switch.