Mitsubishi Eclipse 1990 Service Manual page 1486

differential bearing retainer into the case
bolts to 28 Nm (20
extension housing into the case
to 28 Nm (20
Checking Tool
to check differential bearings turning torque. The turning
torque should be 0.56 to 2.03
If the turning torque is too high, 'install a 0.05 mm
in.) thinner shim. If the turning torque is too low, install
a 0.05 mm
turning torque is obtained.
Revision
and a torque wrench
(5 to 18 in.
in.) thicker shim. Repeat until prober
torque
torque bolts