Mitsubishi Eclipse 1990 Service Manual page 1626

REAR SUSPENSION
Upper arm
Upper arm
bracket
Upper arm bracket
installation nut and bolt
Upper end of upper arm
bracket
Upper Arm Assembly
I N S T A L L A T I O N
UPPER ARM
Tighten the upper arm
that the dimension shown in the
value.
Standard value (A) 37.2
NOTE
If the upper arm bracket is
standard value, the
follows;
B: 213.5 mm (8.4 in.)
C: 289.2 mm (10.6 in.)
Center of the
arm
INSPECTION
Check the bushings for wear and deterioration.
Check the upper arm for bends
Check all bolts for condition and
TSB Revision
installation bolt
at the
2 mm (1.46 in.)
with
dimensibn is
.