Mitsubishi Eclipse 1990 Service Manual page 1862

42-38
Power windows can be operated even when a door is opened within 30 seconds after the ignition
switch has been turned to OFF.
Check the Scan Tool Input Signal
Door switch input signal
OK: The scan tool buzzer sounds once when the door switch is
ON.
Check the Scan Tool Input Signal
Ignition switch input signal
OK: The scan tool buzzer sounds once when the ignition key is
turned to the ON or OFF position.
the ETACS-ECU
Power windows can be operated by means of the power window sub switches (passengers' side),
but can not by means of the power
(Refer to
and <ECLIPSE>
Check trouble symptom.
Check the harness between the power window main switch and
the window
Passenger's side power window can be operated by means of the power window main switch (driver's
side), but can not by means of the power window sub switches (passengers' side).
Power window sub switch continuity check
(Refer to
Check the following connectors:
and
Check trouble symptom.
Check the harness between the power window sub switch and
the power window relay. Repair, if necessary.
BODY
OK
OK
OK
<ECLIPSE
OK
NG
if
OK
OK
NG
TSB Revision
Door
NG
side door switch input circuit system check
to GROUP 54
main switch (driver's side).
NG
Replace
NG
Repair
I
NG
Replace
NG
Repair
Ignition Switch)
check
54 Ignition Switch)