Mitsubishi Eclipse 1990 Service Manual page 1081

AUTOMATIC TRANSAXLE
ENGINE (TURBO) AND
CASE 5 No. 5 hydraulic pressure (rear clutch pressure) is abnormal.
Are other hydraulic pressures (No. 2, 3, 4, 6,
7 hydraulic pressures) normal?
Replace the rings (2 rings), the rear clutch
retainer rings and the input shaft
CASE 6 No. 6 hydraulic pressure (end clutch pressure) is abnormal.
Are other hydraulic pressures (No. 2, 3, 5, 7
hydraulic pressures) normal?
clutch retainer rina and clutch cover rina
CASE 7 No. 7 hydraulic pressure (low-reverse brake pressure) is abnormal.
Are other hydraulic pressures (No. 2. 3, 4. 5,
6 hydraulic pressures) normal?
Yes
No. 7 hydraulic pressure abnormal only during
No. 6 condition.
No
No. 7 condition
Remove the valve body and replace the O-ring
on the top of upper valve body. After that, blow
Replace the center support ring
low-reverse brake piston rings
(Rear clutch exhaust valve N-D control valve)
and
CASE 1
Yes
CASE 3
(2 rings) and Retest
(2
Revision
ENGINE> On-vehicle
Refer to Automatic Transaxle Overhaul
Refer to Automatic Transaxle Overhaul
Refer to Automatic Transaxle Overhaul