Mitsubishi Eclipse 1990 Service Manual page 1327

the
Fit the claw of the
piston to prevent. the
adapter to secure it
Caution
1. Do not push
2. When the
case, do not
en by hand. .
,
(b) Loosen the lock nut until it is about to reach the
V-groove in the adjusting rod. Tighten the special
tool (inner) until it touches the lock nut.
(c) Fit the special tool
outer cylinder
clockwise to lock the lock nut
(inner).
(d) Fit torque wrench to
it to a torque 10
this sequence
tool (inner) to 5
off the special tool (outer) 2 to
Fit the special tool (outer) to the lock nut.
Turn the outer cylinder clockwise and the inner cylinder
counterclockwise to unlock the lock nut and the special
tool (inner).
Caution
When unlocking is carried out, apply equal force
to both special tools to loosen.
servo by
from
at
with
to the nut. Turn
the
inner
(3.6
.
the
use
tool
tighten
Repeat
special
back