Mitsubishi Eclipse 1990 Service Manual page 1155

Code Scan tool
No.
General scan tool
Code sets if the ratio of the input
particular gear ratio.
A hard fault is considered to exist when the fault counter has matured to a value of
An intermittent fault is considered present when the fault counter is greater than or equal
to and less than 255.
No fault is considered to exist when the fault counter is less than 6.
AUTOMATIC TRANSAXLE
ENGINE
Speeds error (Gear, 'ratio in
reverse, lst,
to the output does not compare to a
Revision
. .
Malfunction of input speed'
Malfunction of output speed sensor
Harness or connector between
sensor and TCM open or
Harness or
sensor and TCM or
of
Internal transaxle problem
,
.
.