Transaxle
Transaxle side
mount
stopper
.
MANUAL TRANSAXLE
ENGINE (NON-TURBO)>
Remove the clutch release cylinder
the oil line connection, and fix it to the vehicle chassis.
(1) Support the transaxle
(2) Remove the connection bolts while turning the crankshaft.
(3) Chalk mating marks on the flex plate and clutch pressure
plate for easier installation.
(4) Press the clutch pressure plate into the transaxle for easier
removal.
(5) Remove the transaxle assembly mounting bolt and lower
the transaxle assembly.
INSTALLATION SERVICE POINT
Arrow
Align the notches on the stopper with the transaxle mount
bracket with the arrow mark facing toward the shown direction.
Then install the stopper.
Transaxle
mount
bracket
TSB Revision
CLUTCH RELEASE CYLINDER
FLEX PLATE CONNECTING
ASSEMBLY MOUNTING BOLTS/TRANSAXLE
ASSEMBLY REMOVAL
TRANSAXLE MOUNTING INSTALLATION
disconnecting
,
a transaxle jack.