Mitsubishi Eclipse 1990 Service Manual page 1743

ABS
Illuminated
light
Not illuminated
Ignition
switch
INSPECTION CHART FOR TROUBLE
Get an understanding
Trouble symptom
Communication with scan
tool is not possible.
When the ignition key is turned to "ON" (engine stopped), the ABS warning light does
not illuminate.
After the engine starts, the ABS warning light remains illuminated.
When the ignition key is turned to "START", the ABS warning light does not
illuminate.
After the ignition key is turned to "ON", the
turned to "START", it illuminates. When returned to "ON", the light flashes once, and
then switches off.
Faulty ABS operation
ABS
1. When the ignition
2.
3.
ABS warning light
4. If the illumination is other than the
diagnostic
0 0 0 0 3 6 2 5
the trouble symptoms and check according
Communication with all systems is not possible.
Communication with ABS only is not possible.
waining light blinks once, and when
Unequal braking bower on both sides
braking power
ABS operates under normal braking conditions
ABS operates before vehicle stops under normal
braking conditions
Large brake pedal vibration (Caution 2.)
TSB Revision
A B S
warning light flashes 4 times during a
then
When the ignition
warning light remains
When the ignition switch'
switched off.
trouble
.
CHECK
to
turned
to
off.
to
turned back to the
times then
codes.
the procedure chart.
Inspection Reference'
procedure page
No.,
3
4
5
6
ABS
the
the
,
the