Mitsubishi Eclipse 1990 Service Manual page 1145

Code Scan tool 26
No.
General scan tool
A mismatch has occurred between the shift condition and the pressure switch condition
(ON/OFF) while the vehicle is moving.
Carry out the inspection procedure for code No. 22. (Refer
to
Carry out the inspection procedure for code No. 24. (Refer
to
A mismatch has occurred between the shift condition and the pressure switch condition
(ON/OFF) while the vehicle is moving.
Carry out the inspection procedure for code No. 21. (Refer
to
Carry out the inspection procedure for code No. 22. (Refer
to 135)
Carry out the inspection procedure for code No. 24. (Refer
to
AUTOMATIC TRANSAXLE
ENGINE
Pressure switch circuit:
Pressure switch circuit: ALL
I
Revision
.
Troubleshooting
P r o b a b l e
fluid level in
Harness or connector between
switch and
Harness or connector between
Malfunction of TCM
transaxle problem
fluid level
Malfunction of pressure switch assembly
Harness or connector between OD pressure
I n t e r n a l t r a n s a x l e
.
,
.
assembly
pressure
open or
pressure
open or
,
.