Mitsubishi Eclipse 1990 Service Manual page 1001

MANUAL TRANSAXLE Case
CASE REASSEMBLY
The sealant used to seal the transaxle case halves is Loctite
51617 or equivalent.
The sealant used for the bearing end plate cover is Loctite
18718 or equivalent.
(1) Verify bench fixture shims are removed from bench
Install output and input gear
(2) Install shift rails and forks. into bench fixture.
(3) Install shift blocker assembly into bench
(4) gear case half over pallet fixture.
finger over lug.
(5) Line up reverse brake friction cone lug to the slots in
the gear case. Verify reverse
pallet
shift
is position.