Mitsubishi Eclipse 1990 Service Manual page 1844

Windshield molding
Glass side
Section A-A
Primer
C-C
nm (in.)
BODY
Windshield and Window
WINDSHIELD INSTALLATION
(1) Soak a sponge in the primer, and apply evenly
glass and the body in the places shown in the illustration.
Specified
Caution
1. Apply the primer evenly around the entire circum-
2. Do not touch the coated
(2) After applying the primer, let it
00000136
(3) Within 30 minutes after
gun to apply the adhesive
Specified adhesive:
equivalent
NOTE
Cut the nozzle tip of the sealant gun into a
to facilitate adhesive application.
TSB Revision
ATD Part No. 8808 Super Fast Urethane
or equivalent
ference, because it strengthens the adhesive.
Otherwise, a too thick application
ing of the adhesive strength.
the vehicle body. (Refer to
ATD Part No. 8809 Super Fast
'the
cause lower-
to 30 minutes.
the primer, use a sealant
over the adhesive
or
shape
.