Mitsubishi Eclipse 1990 Service Manual page 1836

A
Section
Quarter
Door window glass Sash weatherstrip
up-stop
up-stop
installation bolt
BODY Windshield and Window Glass
8. Adjust using the up-stop installation bolts so that the
clearance between the quarter
weatherstrip and the door window
value.
Standard value (B): 8.3
NOTE
If dimensions of section A
the height of the quarter window glass may be changed.
Confirm the height of the quarter window glass again.
(Refer to view A in the illustration.)
9. Measure the quarter window to front door gap 76.2 mm
(3.0 in.) from the top of the, door glass and 76.2 mm
(3.0 in.) from the top of the front door. Adjust so that,
gap is same at both locations.
10. Open and close the front door several times after
adjustment to ensure settings are good.
TSB Revision
glass sash
is at the standard
2.0 mm in.)
and A' A' are adjusted,