Mitsubishi Eclipse 1990 Service Manual page 1614

STABILIZER BAR
REMOVAL AND INSTALLATION
Removal steps
1. Stabilizer link mounting nut
2. Stabilizer link
3. Stabilizer bar bracket
INSTALLATION SERVICE POINT
STABILIZER BAR BRACKET INSTALLATION
Position the stabilizer bar so that the marking on the stabilizer
bar and the edge of the bracket becomes the reference value,
and then tighten the stabilizer bar bracket mounting bolt.
INSPECTION
Check the bushings for wear and deterioration.
Check the stabilizer bar for deterioration or damage.
Check all bolts for condition and straightness.
TSB Revision
39 Nm
28
4. Bushing
5. Stabilizer bar