Mitsubishi Eclipse 1990 Service Manual page 1324

AUTOMATIC TRANSAXLE
OVERHAUL
coat the O-ring with automatic transmission fluid,; then
install in the transaxle case and tighten the mounting
bolts to the specified torque.
Differential rear bearing
35 Nm (26
specified torque.
Differential front bearing cap mounting bolts:
70
Differential cover mounting bolts: 11 Nm (8
Detent plate mounting bolt: 11 Nm (8
coat the O-ring with automatic
insert into the transaxle case.
the groove in the manual control shaft and the set
screw hole; then install the set screw.
Manual
Parking roller support bolts: 24 Nm (18
TSB Revision
-Transaxle
a new O-ring on the
the front bearing cap and tighten the bolts to the
Nm (51
the differential cover and a new gasket.
the detent plate.
a new O-ring on the manual control shaft assembly,
shaft set screw: 9
the parking roller support.
I
rear bearing retainer,
mounting
.
,
,
and then
(7